833 found, showing page 13 of 21
$12.29
*5/8X1/2 FLARE UNION
Machined from brass rod. 1 per card. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$5.49
3/4MHX1/2MIP ADAPTER
Brass, Male hose thread x Male pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
3/4MHX3/4MH1/2 ADPTR
3/4" Male hose thread x 3/4" Male hose thread 1 end tapped 1/2" Female pipe thread. Brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.29
3/4MHX1/2FIP ADAPTER
Brass. Male hose thread x Female pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
3/4MHx3/4FIP ADAPTER
Brass. Male hose thread x Female pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
3/4FHx1/2MIP ADAPTER
Brass. Female hose thread x Male pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.19
3/4FHX3/4 SWIVEL ADAPTER
Brass Swivel Adapter, 3/4 In. Female Hose Thread x 3/4 In. Female Hose Thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.29
3/4FHX1/2 SWIVEL ADAPTER
Brass. Female hose thread x Female pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.19
*3/4FHX3/4 SWIVEL ADAPTER
Brass. Female hose thread x Female pipe thread. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.99
1/2"x90* COPPER DROP ELBOW
Copper (solder/sweat) to Female pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$16.99
3/4"x90* COPPER DROP ELBOW
Copper (solder/sweat) to Female pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.99
1/2" SWT DROP EAR ELBOW*********
1/2" nominal copper to copper. Solder/sweat fitting. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$2.79
1/8X1-1/2 GALV NIPPLE
Welded steel pipe. Hot dipped galvanized, meets ASTM A/53 standards. Schedule 40, standard pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$3.99
3/8CF BRASS PEX ELBOW
The SharkBite PEX Barb Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing at a 90 Deg. angle. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system, or a copper crimp ring system as well (each sold separately). Approvals: ASTM F1807, NSF/ANSI 61, NSF 372.
View Details
$34.99
10PK 3/4CFX3/4MP ADAPTER
SharkBite PEX Barb threaded male adapter is made of a lead-free DZR brass, and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system, or a copper crimp ring system (each sold separately) and is FNPT threaded on the other side. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. Approvals: ASTM F1807, NSF/ANSI 61, NSF 372.
View Details
$28.99
3/4" PUSH BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
View Details
$21.99
1/2" PUSH BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
View Details
$9.99
1/2" PUSH COUPLING
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250-psi pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesnt require a PEX tube liner. No soldering, clamps, unions, glue, or special tools are required forinstallation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)
View Details
$10.49
3/4" PUSH COUPLING
Coupling. Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water and radiant heating. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged.
View Details
$11.49
1/2x3/4 PUSH COUPLING
Reducing coupling. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.99
1/2" FIP PUSH ADAPTER
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
$11.49
3/4" FIP PUSH ADAPTER
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
$9.49
1/2" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.99
3/4" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$12.99
1/2" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$12.99
3/4" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$16.49
1/2" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$19.99
3/4" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$10.99
*1/2 SHARK DROP EAR ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$14.99
1/2" PUSH TEE
Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with disconnect clip) and reuseable. Product is individually bagged.
View Details
$16.99
3/4X1/2X1/2 PUSH TEE
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.49
1/2" PUSH CAP
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
$10.49
3/4" PUSH CAP
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
$7.19
*3/4GHX3/8 DISHWSHR ELBOW
3/4" female hose thread swivel nut x 3/8" OD (outside diameter) compression dishwasher elbow with nut, sleeve, and hose washer. Made of lead free brass.
View Details
$5.39
REPAIR STRAINER/******
White plastic replacement basket with post. For Private Label stainless steel/ABS kitchen basket strainer.
View Details
$19.99
2" SCH80 PVC TEE
PVC Schedule 80 pressure fitting. Used to supply a branch supply line from a main line. (Slip x Slip x Slip).
View Details
$3.19
1/2" FXF 90D SCH80 ELBOW
PVC Schedule 80 pressure fitting. 90 deg. elbow. Used to change direction in piping. (FIP x FIP)
View Details
$5.79
1/4" 90D BRASS ELBOW
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.29
*3/8" 90D BRASS ELBOW
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$8.69
1/2" 90D BRASS ELBOW
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
